Empire Comfort Systems - Boulevard Vent-Free Fireplace, Linear SL 30 - Control Options



The Boulevard SL linear ventless gas fireplace offers versatile installation with three different options. Surface-mounted on any wall. Partially recessed in a 2X4 framed wall that can be finished with stone or tile around the fireplace. Fully recessed in a 2X6 framed wall with the option to apply tile or stone over the perimeter of the fireplace.


  • Electronic Ignition
  • Battery Powered Backup (operates during power outages)
  • On-Off Wall Switch with 10-ft Extension Wire
  • Fine Mesh Barrier Safety Screen
  • Optional On/Off Or Thermostat Remote Control
  • Optional Decorative Front oR Narrow Trim Kit
  • Oxygen Depletion Sensor
  • Maintains A Comfortable Temperature For Rooms Up To 417 Square Feet
  • Concealed Gas Control Valve
  • Viewing Area: 28-1/2" Wide X 11-3/4" High
  • BTU Rating: Natural Gas 14,000 BTU - Propane Gas 12,000 BTU
  • Partially Recessed Framing Dimensions: 30-3/4" Wide X 18" High X 3-1/2" Deep *
  • Fully Recessed Framing Dimensions: 30-3/4" Wide X 29-1/2" High X 5-1/2" Deep *

*See Install Manual For Full Details

Boulevard SL Decorative Front Options

Mitered Decorative Front

Mitered Front For Surface-Mount & Partially-Recessed

Narrow Trim Kit

Narrow Trim Kit For Fully-Recessed Installation

The mitered decorative front includes the required fireplace wrap when surface mounting or partially recessing into a wall.

Boulevard SL Installation Options (Side View)

Boulevard SL Surface Mounted

Wall Surface Mounted

Boulevard SL Partially Recessed

Partially Recessed In 2X4 Wall

Boulevard SL Fully Recessed

Fully Recessed In 2X6 Wall

Wall Surface-Mount Installation

The Boulevard SL can be hung like framed art on any wall – including brick, stone, or conventional drywall – and finished with a decorative front. Surface-Mount installation requires a Mitered Decorative Front and a Fireplace Wrap.

Partially Recessed Installation

In a 2 x 4 framed wall, the Boulevard SL can install, partially in the wall and finish with one of two fronts. Partially recessed installation requires a Mitered Decorative Front and installing the included non-combustible material above the fireplace.

Recessed Installation

At just 5-1/2" inches deep the Boulevard SL is the first vent-free fireplace that can install fully in a 2X6 stud-framed wall. Add tile right up to the rectangular opening to create a stunningly beautiful, amazingly efficient clean-face fireplace. The optional narrow trim kit finishes the opening and adjusts for different depths of tile or stone. Recessed installation requires installing the included noncombustible material above and to the sides of the fireplace and tile or stone to the fireplace opening. The optional narrow trim kit hides tile edges and adjusts from 1/2 to 1 inch.

**EverythingGrills.com recommends that all products are installed by a licensed installer. Please review all model manuals and installation guide to insure products are installed correctly. EverythingGrills.com is not responsible for any errors in installation or incorrectly purchased products to be used for installation. Manufacturer's guides should always be used to verify required materials and products prior to installation.**