Osburn 3500 Wood Stove OB03500 - EPA 2020

$2,699.00

Osburn 3500 Wood Stove OB03500

** Designed for existing masonry fireplace**

Specifically designed to face the rigor of winter, the Osburn 3500 is an essential for any spacious home, especially in harsh weather conditions. Despite its emissions below 2.0 g/h, this wood stove utilizes a user-friendly, non-catalytic technology as well as a significant reduction of fuel consumption. The unit features a firebox that can hold up to 50 lb of cordwood, as well as a blower, a thermodisc and an airmate for optimal heat distribution and unparalleled comfort.

A choice of door overlay, a fire screen, a glass ash lip are available as options.

Discover the additional qualities of the Osburn 3500 wood stove

APPLIANCE PERFORMANCE 

Fuel type : Dry cordwood
Recommended heating area-ft² : () 1,000 - 2,700
Overall firebox volume : 3.5
EPA loading volume-ft³ : 2.84
Maximum burn time : () 10 h
Maximum heat output (dry cordwood) :  110,000 BTU/h (32.2 kW)

 

GENERAL FEATURES

Combustion technology Non-catalytic
High-efficiency certified appliance Yes, EPA 2020 approved
Maximum log length 22"
Log positioning Loading over width and over depth
Chimney diameter 6"
Flue outlet diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet) 15'
Glass air-wash system Yes
Premium quality blower included (CFM) 130
Overall dimension (Height) 34 3/4"
Overall dimension (Width) 28 7/8"
Overall dimension (Depth) 33 1/2"

 

Downloads 

Osburn 3500 wood stove install & owner's manual

Osburn 3500 wood stove dimensions

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.**

 

 

**EverythingGrills.com recommends that all products are installed by a licensed installer. Please review all model manuals and installation guide to insure products are installed correctly. EverythingGrills.com is not responsible for any errors in installation or incorrectly purchased products to be used for installation. Manufacturer's guides should always be used to verify required materials and products prior to installation.**